Arcade/MAME Project, Pt IV

 

  • by Gitabushi

Previous installments here: Start (Pt 1), Update I (Part II), Part III

I ended up buying a few pre-made cards that included a crapton of roms off of eBay.

The first one had 18,000 games installed. You aren’t supposed to buy these, because while some games are abandonware or otherwise public domain, a bunch of them aren’t.  They are bootlegged, hacked, copied, or otherwise not legal copies.

Retropie insists you do not purchase pre-imaged cards.  The software is available for download for free.  There is no reason to buy a pre-imaged card.  Unless you want the games that are, at best, a gray area to own.

So I don’t recommend doing it.

My goal was to just to have something to play, while waiting for my own downloaded free RetroPie image to get tweaked up, and then I’d transfer the roms, or just use the roms I already have.

Except nothing worked.

I couldn’t extract the roms from the purchased card. I couldn’t keep the WiFi hooked up. I could connect a bluetooth keyboard, but a conflict with a pre-installed PS3 bluetooth controller messed up the stack so the keyboard was unusable.  Learning to configure the controller was a pain. Configuring a second controller inevitably resulted in glitches making the 2nd controller useless. When an emulator didn’t work and I tried a second suggested emulator, the system prevented me from changing it back or trying another.  I couldn’t seem to add Mame4All as an alternative emulator option. Even adding the roms to my self-imaged card didn’t work.

And only about 1/3 of the games i wanted to play worked.

So I went back to eBay and put in a lowball offer on a card that promised *curated* games. But the offer was so low, I figured it would get rejected and so put in another lowball offer on another.

Then they both got accepted.

The first card was 18k games on a 128gb card. The 2nd was 14k on a 32gb card, and the 3rd (hasn’t arrived yet) is 22k on a 64gb card.

The 2nd card arrived yesterday. And it has a RecalBox program rather than RetroPie. I didn’t immediately realize there was much of a difference, because the appearances were similar. I had a little difficulty getting the controller configuration menu opened and navigated…the controller had a default button configuration, and once I figured that out, it configured easily and I was able to intuitively add favorites, tweak the system (reducing the default overclocking), and try out some games. Every game I tried, worked.

This morning, I looked into what the difference is between RetroPie and RecalBox.

The question “What’s better?” isn’t really answerable, because the answer is “it depends on your skill level and what you want.”  But if you just want to know the difference, the expert in the video says that RetroPie gives you more control over all the details, but RecalBox is easier to set up and use for newbies.

That certainly was my experience.

The 3rd card arrives on Friday.  It is a RetroPie image, but it claims that all the games are curated (checked to be sure they work), so we’ll see if it is as frustrating.

But at this point, I’d recommend downloading RecalBox (also free) to set up your retro arcade player on a Raspberry Pi.  And then acquiring games by whatever method you feel is appropriate.
Next up: I finally figured out what I want out of/from/in a controller.  The standard setup isn’t it.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s